The Rohrbaugh Forum
Rohrbaugh Products and Accessories => Rohrbaugh R9 (all variations) => Topic started by: 08055 on September 09, 2011, 09:24:11 PM
-
In addition to field stripping and cleaning the R9, is there anyone here who does a complete disassembly and reassembly of the R9?
I ask this question because like a lot of 1911 owners, I do it to my 1911. There is a sense of confidence and security when we can do this to our pistols because we can really verify that the internal parts are well maintained and working. :)
-
I have not but one of the members posted this picot his disassembled pup, and I do not remember who it was.
(http://i413.photobucket.com/albums/pp216/yankee2500/DSC03393.jpg)
-
That doesn't look too bad, not compared to some others (I'm thinking of a P7...)
Thanks for the pic.
-
That would have been Rich_G. Here's his post.
Had a grip screw that the 1/16 hex stripped out >:( so I had to drill it out! I used 3 different size LEFT hand drill bits I had laying around starting with a 5/64. Worked perfectly! ;) Anyway after seeing the small metal fragments I decided to give it a complete cleaning, It was quite simple the only tools used were a small punch and a golf tee (pictured to the right), here are some pic's!
(http://i1020.photobucket.com/albums/af322/Rich_G_bucket/R9s/DSC03393.jpg)
(http://i1020.photobucket.com/albums/af322/Rich_G_bucket/R9s/DSC03395.jpg)
(http://i1020.photobucket.com/albums/af322/Rich_G_bucket/R9s/DSC03394.jpg)