The Rohrbaugh Forum
Miscellaneous => Classifieds -- For Buying or Selling => Topic started by: bamboobob on March 19, 2013, 03:42:25 PM
-
Hooked (med) $ 68.50 Straight (long) $61.50 $5.00 s@h on one or more
30 day return on parts, mag not included (but could be)
For more info and pics check under accessories - prototype extensions.
http://www.rohrbaughforum.com/index.php?topic=6717.0
Short or smooth ones also.
PM and post here with interest - lets talk.
-
When clicking on previous pic I only get a sliver.
Trying again.
-
Pm Sent
-
Anselmgrey:
Hi thanks for interest. PM also sent
I'm ready to sell some. If you do not like fit or finish you may return them. You may be first to get some.
I would like to talk. Please feel free to call any time or day, 12 at night OK.
I would be glad to call you or call you back when convenient for you.
I rarely check e-mail, so phone is best, forum message 2ed best.
Thanks, Bob
p. s. I do not think your message went through.
e-mail good too. in case I need to use other computer
-
Here are more specs. straight adds .62" and about 3gr. (6gr. - 3gr.) to standard mag.
hooked adds .45" and about 4gr. (7gr. - 3gr.) to standard mag.
Lighter and/or shorter parts available.
-
Sent an e-mail and a pm...........no replies.
-
Hi Faa
Thanks for interest.
PM sent with telephone number.
I do not check here every day( had emergency root canal yesterday, 1st ever !)
Bob
-
Luv my yorkie:
Hi, Mike
Package just sent. Expected arrival on Monday 15th April.
Tracking # 9500 1106 7515 3102 46XX XX
Extras too!
Thanks, Bob
P.M. just sent -- will call too.
-
I picked up both mag extensions from the Post Office yesterday and they are beautiful! The craftsmanship leaves nothing to be desired. I'm looking forward to attaching them this weekend when and if time permits. Bob has been great throughout the transaction and I recommend him as a source if you need mag extensions.
-
Cargaritaville
Hi, Car
Thanks for interest, PM sent with telephone #.
Bob
-
Now available straight or snubbie hooked.
Smooth or shorter also available.
PM With / or for telephone number.
Post here too! PM's may not always go through.
-
Please PM me your phone number when you have a chance.
Do you have these in black as well?
-
Please PM me your phone number when you have a chance.
Do you have these in black as well?
Hi Ammons,
Welcome to the forum.
PM all ready sent no black yet, 2 snubbie hooks no problem.
Thanks for interest, Bob
Maybe someone knows who can do some in black???
-
PM sent BOB .. anybody bought different styles of these ?
I am inclined to get a variety in order to establish preference.
& still want a SILVER Yankee hooked extension too ,
so there's a WTB thread in this classifieds section from ME ;)
My phone # sent to you in my PM Bob, please gimme a call !
-
Tom,
Thanks for interest.
I will call in a few min.
Bob
-
Please send me a message with contact and ordering info. Thanks!
-
Hi, Joker :
Thanks for interest.
P. M. sent
Bob,
-
pm sent
-
Hi Fish,
Contact info sent.
Also off to call Member ( at 954-***-****) who sent PM yesterday
-
I'm interested. Can you email me details, payment info? Shawnbellegia@comcast.net
Thank you
-
Hi Guidob,
Welcome to Forum.
Thanks for interest.
PM sent, Forum should auto send e-mail.
also check thread under accessories ... prototype extensions
Thanks, Bob
-
When clicking on previous pic I only get a sliver.
Trying again.
can you one in black for my special forces, maybe send it to them so it can be finished at the same time, thats a stretch but worth the ask
-
RJ
PM sent w/ contact info
now /avin/ key board problems , missin/ 1,2 letters after f .
and sometimes letters o and after k, s/ift and de/ete issues too
YIKES
Parts may be sent to Ro/rbau// ask Maria or Robar or ot/ers
Bob
ps ...lol
-
Hi, RJ
PM sent with contact info
Keyboard replaced.
Parts may be sent(?) to Rohrbaugh, ask Maria or Robar or others or you.
I do not yet have my parts in black, I too would like to have some done in black
(I may have read that Robar will do for $15, not sure, -- maybe some one else ,
? NP3 ? anodizing ?)
Bob
-
Update: Some hooked ones left, possible others.
p.s.
I strongly urge people to use a bag or towel when removing a mag. floor plate or extension.
( unless you are in a empty room !!)
To release floor plate push in bump through hole in bottom of mag, slide off to front ( do in clear bag, parts may shoot out ) Reverse to put new one on. Use bag, if you loose small inner part, they can not be bought. VERY carefully! MAKE sure it is LOCKED in place, may need tapping to set inner plate.
( My springs only go in one way. )
-
Hi - I'd like to buy a mag extension. I sent you a pm and e-mail. Let me know. Thanks!
-
I sent you a pm, would like to buy some mag extensions. Call me anytime. Thanks
-
Hi - I'd like to buy a mag extension. I sent you a pm and e-mail. Let me know. Thanks!
Hi Guido PM sent with info.
-
I sent you a pm, would like to buy some mag extensions. Call me anytime. Thanks
Hi Gooddog PM sent with info. Your PM never made It (I think it sometimes happens)
Hope to hear from you or try again. VERY GOOD JOB POSTING HERE TOO.
-
Hello sir, could you please send me information on how to order one of your magazine extensions. I also sent you a PM message. Thank you very much for your time and I look forward to ordering from you.
Thank you,
Brian
-
PM sent thanks!
-
Hello sir, could you please send me information on how to order one of your magazine extensions. I also sent you a PM message. Thank you very much for your time and I look forward to ordering from you.
Thank you,
Brian
Hi Brian, Welcome to the Forum Thanks for interest, --- PM received PM sent -- will call soon.
-
PM sent thanks!
Hi, Placer Welcome to the Forum Thanks for interest, --- PM received PM sent -- will call soon.
-
Message sent with my phone number , would love to buy 2 . Thank you
-
Hi Drizden,
Welcome to the Forum Thanks for interest, ---NO--- PM received!!!
Will try to send PM soon
Bob
(update - note PM sent)
-
I am now basically sold out (two pairs sold pending funds- do not expect any different)
May help Drizden with some of mine out of archives or odds and ends.
May make some more, We have not decided yet. (leaning toward straight or both)
Have not broken even $ wise (not counting tools or time) but have some for me.
Hand finishing and talking to people is fun, other wise this was a huge lot of time and PIA.
I have some machined blocks that can be shaped, may customize these or others.
May list individual ones in future
Worst is over, If we do more will not be so bad.
Will still be ckecking/on forum but not all the time.
Thanks again all for interest
Bob
PS any suggestions for anodizing
(I may some day try home "spooge anodizing" with variable power supply,
possible draino and soda pop or ???)
-
Sent pm with my cell # , would really like to buy 2 hooked for my off duty back up rohrbaugh :)
-
HI Drizden
I now have # and messages
Will call in a few.
I see you may be here now, will try PM
I have 1 Hooked for you for sure. We can talk and work out possible other.
Will copy above to PM now I hope (ugh typing)
Thanks Bob
-
Bob,
Brand new to this forum and to a R9. Would very much like to buy one or two extensions (straight or curved) if any might be still available.
Thanks,
Mitchell
-
Hi Prairie,
I will soon process 2 orders-
another 1 now pending-
1 maybe-
I will call and/or PM with #
We will have to wait and see
Thanks for interest and welcome to the Forum
Bob
-
Hello sir, could you please send me information on how to order one of your magazine extensions. I also sent you a PM message. Thank you very much for your time and I look forward to ordering from you.
Thank you,
Brian
Hey Bob, I just wanted to say I absolutely LOVE the magazine extensions. Excellent craftsmanship. They fit the magazine perfectly and look great. I'm very happy with them! Hopefully, when you get some more in, I will place another order. Please keep me posted! Thanks again!!
Brian
-
Hey Bob
Got mine. It's perfect. Looks great. Couldn't thank you enough. What a pleasure to do business with you.
-
Hi Prairie,
I will soon process 2 orders-
another 1 now pending-
1 maybe-
I will call and/or PM with #
We will have to wait and see
Thanks for interest and welcome to the Forum
Bob
Hi Bob,
Please put me down for two curved extension if you get another order in. Either way, I would like to get at least one curved.
Thanks in advance
magrred
-
Hello Bob.
I would like to order one curved extension ( Hooked (med) $ 68.50 ) as well, if possible. In any case, if it will be available, please PM me. Thank you.
-
Thanks all, for interest + reviews
Still sold-out Last shipped tues w/ fri del
CNC Buddy / partner busy with full time
-- currently carving new wax prototype shapes
Hope to test in wax and/or al. (hand carved from metal block with mag connect)
Evantually will have a very few.( other possiblities too )
Next test SHALL include old silvertip Vs. new golddots (115's) Finally!
Bob
-
Thanks Bob I received my hooked and custom short straight extension today and they look fantastic!
Now I just need a few R9's to use them on :)
-
Hi Placer
Glad to hear it.
Hope you get an R9 soon.
Looks like a response to your wanted ad.
Thanks again
Bob
-
the local R9 offer was a higher round count than I'd prefer and priced at very close to retail so I passed
-
Hi Bob, can you send me a pic of your straight extension. Thanks.
-
Sending PM Bob
-
(note - copy of pm sent)
Hi Josh,
Currently sold out of the extensions, slowly considering multiple options.
check threads under classifieds and accessories for pics
http://www.rohrbaughforum.com/index.php?topic=6841.0
http://www.rohrbaughforum.com/index.php?topic=6717.0
If you need O rings / screws check under classifieds for them from Yankee2500, they are very popular here.
Bob
-
Thanks again to Bamboobob for being super helpful not only in my purchase of mag extensions (which were awesome!) but also taking the time to send me a buyer when I had a change of plans!
Bamboobob is a great guy to do business with!
-
Placer,
Thanks again so much.
Thanks for the recent and other phone conversations.
(great calls, many topics - far better for me than typing )
Bob
-
I'd like to add my thanks to Bob for being a true gent. Not too many around these days, so thanks again for your help.
-
Prairie,
Thank you so much, I am glad I could help. As before it was great to talk to you Guys. Please feel free to call for support / any info.
Don't forget to use bag.
Hope to post details / link soon.
Bob
-
To release floor plate push in bump through hole in bottom of mag, slide off to front ( do in clear bag, parts may shoot out ) Reverse to put new one on. Use bag, if you loose small inner part, they can not be bought. Make sure it is locked in place, may need tapping to set inner plate.
Above -- partial post from :
http://www.rohrbaughforum.com/index.php?topic=7045.msg80097#msg80097
PS current springs only go in one way
-
I'm looking for any mag extensions for my 9mm Rohrbaugh. Are there any for sale here or on the internet.
snaakedoc@gmail.com
-
I ordered a silver and a black anodized from MOE. Should be here Mon. There is a link somewhere on the forum about this. His phone# 203-775-1013 MASTER CLASS SPORTS $30.00 including shipping. He is there after 5PM EDT. Told me if I did not like, could return. Hope that helps.
-
did any one of you got the Magazine Extensions from Mon (MASTER CLASS SPORT) yet ? would like to see some good pictures. ;)
-
did any one of you got the Magazine Extensions from Mon (MASTER CLASS SPORT) yet ? would like to see some good pictures. ;)
http://www.seecamp.com/cgi-bin/yabb2/YaBB.pl?num=1398300421
-
did any one of you got the Magazine Extensions from Mon (MASTER CLASS SPORT) yet ? would like to see some good pictures. ;)
http://www.seecamp.com/cgi-bin/yabb2/YaBB.pl?num=1398300421
You are not allowed to access this section Need registration.
-
Sorry, I forgot you need 20 posts to access the buy,sell trade at Seecamp.
(http://)
-
I bought these from MOE. Master Class Sports I got the silver one, waiting on the black one. Solid construction, but will test at the range to see if it holds up.
-
Thank you guys for replying. great pictures . Magazine extension look good though.
-
I am interested in the extension.
-
Dirtyammo,
PM sent.
Are you looking for parts from me? Bamboobob I may have new options in future.
Or from Mo (NOT ME)!
Another thread shows pictures of Mo's stuff,
BOTH GOOD AND BAD!!
will ad link soon http://www.rohrbaughforum.com/index.php?topic=7347.msg82656#msg82656