The Rohrbaugh Forum

Miscellaneous => Classifieds -- For Buying or Selling => Topic started by: yankee2500 on February 23, 2012, 01:37:11 AM

Title: Reposted with Grip Screws
Post by: yankee2500 on February 23, 2012, 01:37:11 AM: Post Combined With Grip Screws Post

Duane, Please Delete
Title: Re: FS: Grip Screw O-Rings
Post by: epkptp on February 23, 2012, 04:51:57 AM: I'll take 10!
Title: Re: FS: Grip Screw O-Rings
Post by: Chief-USN on February 23, 2012, 07:13:31 AM: "O" rings? I am racking my brain, (does not take long, but sure hurts :) ) Are the rings on there from the factory? I was told by Maria to just put a dab of Loktite on the screws. Was that in additian to the Rings? Trying not to break down my Pup just to see if it has rings.

Chief
Title: Re: FS: Grip Screw O-Rings
Post by: kjtrains on February 23, 2012, 08:39:59 AM: Quote from: Chief-USN on February 23, 2012, 07:13:31 AM
"O" rings? I am racking my brain, (does not take long, but sure hurts :) ) Are the rings on there from the factory? I was told by Maria to just put a dab of Loktite on the screws. Was that in additian to the Rings? Trying not to break down my Pup just to see if it has rings.

Chief

Chief. O-Rings are not on from the factory. Get yours, now, from John. :)
Title: Re: FS: Grip Screw O-Rings
Post by: Richard S on February 23, 2012, 09:31:16 AM: Quote from: yankee2500 on February 23, 2012, 01:37:11 AM
Due to popular demand I now have in stock O-Rings that go under the grip screw.

The purpose is to keep the screws from loosening.

These O-Rings are Viton 75 compound

Description:

Excellent resistance to petroleum products and solvents.

Temperature Range: –40° to 392°F

5 - O-Rings $2.00 Shipped

10 - O-Rings $3.60 Shipped

Well done, John! I've been preaching on the efficacy of O-rings to secure grip screws for some time and am glad to see you add them to your inventory of after-market accessories for the R9.

And, although I have a supply of my own, as a matter of principle I'm ordering 10 from you today by Pay Pal.
Title: Re: FS: Grip Screw O-Rings
Post by: kjtrains on February 23, 2012, 09:56:25 AM: Quote from: Richard S on February 23, 2012, 09:31:16 AM
Quote from: yankee2500 on February 23, 2012, 01:37:11 AM
Due to popular demand I now have in stock O-Rings that go under the grip screw.

The purpose is to keep the screws from loosening.

These O-Rings are Viton 75 compound

Description:

Excellent resistance to petroleum products and solvents.

Temperature Range: –40° to 392°F

5 - O-Rings $2.00 Shipped

10 - O-Rings $3.60 Shipped

Well done, John! I've been preaching on the efficacy of O-rings to secure grip screws for some time and am glad to see you add them to your inventory of after-market accessories for the R9.

And, although I have a supply of my own, as a matter of principle I'm ordering 10 from you today by Pay Pal.

Well done, too, RS. Great idea!

John. I'm ordering 20, today, to have a few extra. Thanks.
Title: Re: FS: Grip Screw O-Rings
Post by: Trailblazer on February 23, 2012, 12:29:04 PM: I'll take a 24.
Title: Re: FS: Grip Screw O-Rings
Post by: Trailblazer on February 23, 2012, 12:32:08 PM: How can we order the O-Rings?
Title: Re: FS: Grip Screw O-Rings
Post by: backupr9 on February 23, 2012, 03:03:11 PM: John, I'll take 10. PM sent.
Title: Re: FS: Grip Screw O-Rings
Post by: mz368 on February 23, 2012, 04:54:24 PM: John-

I'll take 20. PM sent.

-Chris
Title: Re: FS: Grip Screw O-Rings
Post by: Trailblazer on March 05, 2012, 09:27:36 PM: John,
Did you get the O-Rings in yet?
Rich
Title: Re: FS: Grip Screw O-Rings
Post by: yankee2500 on March 05, 2012, 10:36:53 PM: Not yet, I just sent off the sample of the needed size o-ring that I received from one of our forum members the end of last week and it may have arrived at the distributor today. Because I had no size number they wanted to match what was being used.
I have all this money members sent me for o-rings and was thinking maybe I'll go back to Rome for a few weeks. ;D ;D

I will post as soon as I have any info.
Title: Re: FS: Grip Screw O-Rings
Post by: backupr9 on March 14, 2012, 09:34:57 AM: John, if you are now in Rome, be advised that my man Guido is looking for you!
Title: Re: FS: Grip Screw O-Rings
Post by: yankee2500 on March 14, 2012, 07:22:06 PM: I gave Guido a slice of pizza and a Cappuccino and he said were good. ;D

I just received the samples yesterday and checked them against the samples today and placed the order this afternoon.
They said it would be a few days before they got them in and probably a few more before I get them. :)
Title: Re: FS: Grip Screw O-Rings
Post by: backupr9 on March 14, 2012, 09:11:07 PM: Quote from: yankee2500 on March 14, 2012, 07:22:06 PM
I gave Guido a slice of pizza and a Cappuccino and he said were good. ;D

I just received the samples yesterday and checked them against the samples today and placed the order this afternoon.
They said it would be a few days before they got them in and probably a few more before I get them. :)

CURSES! FOILED AGAIN!
Title: Re: FS: Grip Screw O-Rings
Post by: Richard S on March 14, 2012, 09:22:34 PM: Quote from: yankee2500 on March 14, 2012, 07:22:06 PM
I gave Guido a slice of pizza and a Cappuccino and he said were good. ;D

* * *

John:

My friend Giuseppe told me that Guido really liked that pizza but that he wants Chianti the next time. ;)
Title: Re: FS: Grip Screw O-Rings
Post by: kjtrains on March 14, 2012, 09:39:58 PM: Quote from: yankee2500 on March 14, 2012, 07:22:06 PM

I just received the samples yesterday and checked them against the samples today and placed the order this afternoon.
They said it would be a few days before they got them in and probably a few more before I get them. :)

John. Good news. Sounds like it won't be much longer. Thanks. :)
Title: Re: FS: Grip Screw O-Rings
Post by: yankee2500 on March 16, 2012, 11:25:18 AM: It took a lot longer than I had expected because the supplier did not stock this size o-ring. I had to send them a sample which I had to get from Richard and mail to them to checked out and then they had to ordered samples to compare to my samples. After they received there samples they shipped them to me for approval and now the order is in. ;D

As soon as the o-rings arrive I will get them shipped out.

Thanks to all for your patience.
Title: Re: FS: Grip Screw O-Rings
Post by: Robar233 on March 16, 2012, 05:28:06 PM: John,

Thank you for doing this for all of us! It sounds like you have samples of your samples of your samples.

Robar233
Title: Re: FS: Grip Screw O-Rings
Post by: yankee2500 on March 26, 2012, 07:03:12 PM: The O-Rings Have Arrived

I will try and get all the orders shipped by weeks end. :)
Title: Re: FS: Grip Screw O-Rings
Post by: kjtrains on March 26, 2012, 07:13:13 PM: You did good, John...............and thanks! :)
Title: Re: FS: Grip Screw O-Rings
Post by: Richard S on March 27, 2012, 06:56:45 AM: And here is a photograph of the elusive O-rings, the praises of which I have been spouting like some street-corner preacher for so long:

(http://i2.photobucket.com/albums/y30/RichardS/RohrbaughGripScrewO-Rings.jpg)

Thank you, John, for adding the O-rings to the after-market accessories you offer for the R9.
Title: Re: FS: Grip Screw O-Rings
Post by: Z on March 27, 2012, 12:19:42 PM: John

I just mailed a payment for 20 O-RINGS. Please let me know when they ship.

Thank you Richard S and John! :)
Title: Re: FS: Grip Screw O-Rings
Post by: yankee2500 on March 27, 2012, 06:49:22 PM: Adam, I will let you know. :)
Title: Re: FS: Grip Screw O-Rings
Post by: Giraffes on March 28, 2012, 01:02:51 PM: Placing an order for 20 o-rings and a set of flat head screws in a few minutes. Can't wait to see how much better the o-rings are than the blue loctite I've been using!
Title: Re: FS: Grip Screw O-Rings
Post by: Trailblazer on March 28, 2012, 09:19:25 PM: John,
Put me in for 20. Payment is on its way.
Rich
Title: Re: FS: Grip Screw O-Rings
Post by: Richard S on April 04, 2012, 05:15:42 PM: The O-rings arrived in today's mail. I should now be well supplied for the rest of my days with what I consider to be a very useful accessory for my venerable Farmingdale R9.

Thank you, Sir.
Title: Re: FS: Grip Screw O-Rings
Post by: Trailblazer on April 04, 2012, 05:49:51 PM: Yankee,
Did you ship mine yet??
Are the O-rings installedon all the grip screws?
Thanks,
Rich
Title: Re: FS: Grip Screw O-Rings
Post by: yankee2500 on April 04, 2012, 08:50:25 PM: Rich, the o-rings go under the head of each grip screw.
Title: Re: FS: Grip Screw O-Rings
Post by: yankee2500 on April 05, 2012, 12:25:53 AM: I believe I have all the o-rings shipped (as of 4/5) if you do not receive your order by mid week next week PM me and let me know.

Thanks for your patience.
John
Title: Re: FS: Grip Screw O-Rings
Post by: kjtrains on April 05, 2012, 12:37:58 AM: John. Haven't received mine yet, but I'll keep looking! :)

UPDATE: O-Rings arrived on 4/6'; thanks John and to RS for the idea.
Title: Re: FS: Grip Screw O-Rings
Post by: Richard S on April 05, 2012, 06:25:53 AM: Quote from: Trailblazer on April 04, 2012, 05:49:51 PM
* * *
Are the O-rings installed on all the grip screws?
* * *

Yes. They take the place of an adhesive threadlocker, such as Loctite.
Title: Re: FS: Grip Screw O-Rings
Post by: Z on April 05, 2012, 01:19:11 PM: John

I just received and installed my O-Rings.
Thank you. :)
Title: Re: FS: Grip Screw O-Rings
Post by: Richard S on April 08, 2012, 06:02:34 PM: Quote from: Z on April 05, 2012, 01:19:11 PM
John

I just received and installed my O-Rings.
Thank you. :)

My experience and views are well documented on these little problem solvers. Please let us know how they work for you when you have had an opportunity to test their ability to help with grip- screw retention during range sessions.
Title: Re: FS: Grip Screw O-Rings
Post by: Z on April 08, 2012, 06:15:58 PM: I will keep you posted.
Title: Re: FS: Grip Screw O-Rings
Post by: tracker on April 08, 2012, 09:39:03 PM: Many thanks to Richard and John for opening this door for us.
Title: Re: FS: Grip Screw O-Rings
Post by: Z on April 09, 2012, 08:52:55 AM: Quote from: tracker on April 08, 2012, 09:39:03 PM

Many thanks to Richard and John for opening this door for us.

I second that.
Thank you! :)
Title: Re: Reposted with Grip Screws
Post by: Verdugoman on April 21, 2012, 06:46:13 PM: I would buy 10 o rings, but I need to know where to send the money. Thanks Dave :)
Title: Re: Reposted with Grip Screws
Post by: kjtrains on April 21, 2012, 06:58:42 PM: Quote from: Verdugoman on April 21, 2012, 06:46:13 PM
I would buy 10 o rings, but I need to know where to send the money. Thanks Dave :)

Dave. Here's John's mailing address; along with his PayPal address.

Quote from: yankee2500 on February 09, 2011, 09:42:46 PM
I have Black Alloy Steel Grip Screws available to replace the Stainless factory screws. They are harder, stronger and the allen head will hold up much better.

I have Flat Head for Factory Grips & Button Head for VZ Grips

$4.60 for 5 screws Shipped paying with a USPS money order.

5 Screws Shipped paying with paypal = $4.78

O-Rings

Due to popular demand I now have in stock O-Rings that go under the grip screw.

The purpose is to keep the screws from loosening.

These O-Rings are Viton 75 compound

Description:

Excellent resistance to petroleum products and solvents.

Temperature Range: –40° to 392°F

Prices are for payment by cash, money order or paypal "Gift" option for regular paypal payment please add 4%

5 - O-Rings $2.00 Shipped

10 - O-Rings $3.80 Shipped

Mailing address is.

John Perrin
2500 Toyes Dr.
Denton, NC 27239

Pay-pal address yankee2500@rtmc.net

(http://i413.photobucket.com/albums/pp216/yankee2500/IMG_0506.jpg) (http://i413.photobucket.com/albums/pp216/yankee2500/IMG_0541.jpg)

John
Title: Re: Reposted with Grip Screws
Post by: Z on April 23, 2012, 09:30:11 AM: John

I am sending out payment for 20 button head screws and 20 O-Rings this week.

Thanks again for offering these fine products! :)
Title: Re: Reposted with Grip Screws
Post by: Verdugoman on April 23, 2012, 07:57:51 PM: Thank You, John , for the mailing info. The CHECK is in the mail. Dave ;D
Title: Re: Reposted with Grip Screws
Post by: yankee2500 on April 23, 2012, 08:26:54 PM: Dave, your welcome but it was Ken who posted the info, he's my right hand man. ;D
Title: Re: Reposted with Grip Screws
Post by: Verdugoman on April 25, 2012, 10:24:53 PM: John , I have a question. Do the o-rings only work with the button head screws? :-\ Dave
Title: Re: Reposted with Grip Screws
Post by: yankee2500 on April 25, 2012, 10:52:44 PM: They work with either type of screws/grips.
Title: Re: Reposted with Grip Screws
Post by: dmunofo on June 13, 2012, 10:38:57 AM: Sending you a PM
Title: Re: Reposted with Grip Screws
Post by: yankee2500 on June 17, 2012, 11:26:17 PM: (http://i413.photobucket.com/albums/pp216/yankee2500/bump1.gif) (http://i413.photobucket.com/albums/pp216/yankee2500/smiley-bounce009.gif)