The Rohrbaugh Forum
Rohrbaugh Products and Accessories => Cleaning and Maintenance of the R-9 => Topic started by: global-security on October 11, 2009, 06:07:04 PM
-
Hi All,
Ok I just completed my very first Rohrbaugh Stealth Cleaning. ;D
First off, from the many horror stories I reviewed on the forums.. I was for sure expecting the worse. Well to my amazement I cleaned and lubed the pistol in approx 30 minutes. I made sure to lube every part mentioned in the instruction booklet and listed on the forum.
Upon stripping the pistol I thoroughly cleaned inside -out. I then sprayed a dry-lube on all the necessary parts and then followed up with recommended forum grease.
BTW: I removed the spring assembly by hand and reinserted the assembly using needle nose pliers. However I will mention I purchased a fuse puller as mention in the forums, but I have not had an opportunity to drill the holes in the fuse puller yet.
I am sooooooooooooo happy this did not turn into an all day project or worse.
So far very happy with my purchase, cleaning ease and quality.
Thanks for listening.
Jordan
;D
-
Congratulations, Jordan, on your first successful cleaning. It is like many other things in life: our imagined fears are much worse than the reality.
One of my more astute friends observed that nothing very good or very bad lasts for very long.
-
Words of wisdom.
-
Congratulations, Jordan! (The first time for anything of consequence is rarely forgotten. ;) )
-
Jordan, way to go guy, easy does it. Tom