The Rohrbaugh Forum

Rohrbaugh Products and Accessories => Cleaning and Maintenance of the R-9 => Topic started by: DavidS on May 23, 2011, 11:50:05 PM

Title: Disassembly/Reassembly Device
Post by: DavidS on May 23, 2011, 11:50:05 PM: I have patented and produced a device used in the disassembly and reassembly of the R-9. An instuctional video of how to use the device is posted on youtube.com and can be accessed by clicking the following link, http://www.youtube.com/watch?v=58xJ9Fv0P6Y. The device sells for $20 US including shipping and handling. Payment can be made by check or money order. The website is http://sites.google.com/site/slidebloks .
Title: Re: Disassembly/Reassembly Device
Post by: yankee2500 on May 24, 2011, 12:55:43 AM: David, Welcome to the group. Pretty slick little block.
Title: Re: Disassembly/Reassembly Device
Post by: garymass on May 24, 2011, 01:15:25 AM: Nice job...
Title: Re: Disassembly/Reassembly Device
Post by: Reinz on May 24, 2011, 01:48:11 AM: Welcome to the forum.

Looks like you took Steve Bedair's idea to the next level, good job!

Good Luck with sales.
Title: Re: Disassembly/Reassembly Device
Post by: kjtrains on May 24, 2011, 08:18:37 AM: Quote
I have patented and produced a device used in the disassembly and reassembly of the R-9. An instuctional video of how to use the device is posted on youtube.com and can be accessed by clicking the following link, http://www.youtube.com/watch?v=58xJ9Fv0P6Y. The device sells for $20 US including shipping and handling. Payment can be made by check or money order to David Shober, 923 Maple Lane, Pulaski, PA 16143. If you have any questions concerning the device, I can be reached by e-mail at drsdo@comcast.net.

David. Welcome to the Forum. Great job on the device for the R9. Thanks.
Title: Re: Disassembly/Reassembly Device
Post by: Reinz on May 24, 2011, 06:21:40 PM: David, be sure and make a post in the classifieds so your tool will be easy to find.
Title: Re: Disassembly/Reassembly Device
Post by: DavidS on May 24, 2011, 09:13:24 PM: Thanks for your support and comments. I have had the patent for over 5 years. Just took some time to get around to producing it.
Title: Re: Disassembly/Reassembly Device
Post by: Dire_Straits on June 21, 2011, 04:48:29 PM: Order placed, payment mailed, PM sent.
Title: Re: Disassembly/Reassembly Device
Post by: DavidS on June 25, 2011, 08:34:02 AM: Thanks, I will get it out to you ASAP. DavidS
Title: Re: Disassembly/Reassembly Device
Post by: Dire_Straits on June 28, 2011, 08:54:49 AM: Quote
Thanks, I will get it out to you ASAP. DavidS

Received in the mail yesterday. Great little device, definately beats the CPVC 3/4 x 1/2" reducer I was using.

Thanks.
Title: Re: Disassembly/Reassembly Device
Post by: DavidS on June 30, 2011, 11:43:22 PM: Glad to here that you are pleased with it. Now you can shoot more often and clean and change the spring more easily. DavidS
Title: Re: Disassembly/Reassembly Device
Post by: backupr9 on July 15, 2011, 03:46:51 PM: David S,

Just received mine. Works great. Thanks!!!
John
Title: Re: Disassembly/Reassembly Device
Post by: DavidS on July 18, 2011, 12:20:05 PM: Thanks for the feedback and purchase. Good Luck shooting. DavidS
Title: Re: Disassembly/Reassembly Device
Post by: PeterGunn on March 13, 2012, 10:21:57 AM: Money Order going out in today's mail.
Title: Re: Disassembly/Reassembly Device
Post by: PeterGunn on March 19, 2012, 05:59:44 PM: My disassembly device came in todays mail. Looks real nice.

Thank you.
Title: Re: Disassembly/Reassembly Device
Post by: jayson on April 22, 2012, 09:35:34 PM: Awesome device, will have my order on my way to you as soon as I can.
Title: Re: Disassembly/Reassembly Device
Post by: C0untZer0 on December 26, 2012, 10:32:54 PM: Are you still selling these?

I'm getting an R9 soon and after reading posts and watching the video, I think I'm going to need one...
Title: Re: Disassembly/Reassembly Device
Post by: DavidS on January 04, 2013, 09:47:53 PM: Sales are temporarily on hold due to the escalation in cost of liability insurance for any firearms related sales. I am working on resolving this issue. I appreciate your patience. I will advise when sales can resume. Thank you for your support.
Title: Re: Disassembly/Reassembly Device
Post by: 1marine on January 10, 2013, 11:05:59 AM: how to get one of these-r9 been apart for months
Title: Re: Disassembly/Reassembly Device
Post by: BigAl on January 10, 2013, 11:12:35 AM: As soon as available...please contact me. Thanks.
Title: Re: Disassembly/Reassembly Device
Post by: Richard S on January 10, 2013, 11:48:41 AM: Quote from: 1marine on January 10, 2013, 11:05:59 AM
how to get one of these-r9 been apart for months

1marine:

Welcome to the Forum.

If you could describe the problem you're having in reassembling your R9, a lot of us here would be willing to help you through the process. As the saying goes, it can be done in a number of ways if you just "hold your tongue right."
Title: Re: Disassembly/Reassembly Device
Post by: Retired on October 29, 2013, 06:44:32 PM: Are these still available?
Title: Re: Disassembly/Reassembly Device
Post by: backupr9 on November 02, 2013, 11:28:27 PM: The UTube link on the first post seems to be no longer available. Any picture or description of these items available? Heck, I'd just advertise it as a paper weight and sell every one I could make. :)
Title: Re: Disassembly/Reassembly Device
Post by: Richard S on November 03, 2013, 04:09:09 PM: In view of David's suspension of efforts to sell his patented device, a suspension which has now lasted nearly one year, a description of Steve Bedair's unpatented barrel-pin removal tool might again be in order. The dimensions of the Bedair tool made of PVC piping are contained in the following thread:

http://www.rohrbaughforum.com/index.php?topic=3300.msg35317;topicseen#msg35317

And photos of it can be seen here:

http://www.rohrbaughforum.com/index.php?topic=3364.0