The Rohrbaugh Forum
Miscellaneous => Other Guns => Topic started by: thor447 on November 19, 2012, 09:23:59 PM
-
After much deliberation about which custom 1911 to get, I've decided on the Ed Brown Kobra Carry. Since I dropped a very good chunk of dough at the Tulsa Arms Show, I did not have the discretionary funds available to get my beloved 1911. I made a trade with a friend of mine today who manages a firearms store in Mustang, OK. He had a pristine NIB Ed Brown Kobra Carry he got in a week or two ago from the manufacturer. Being the antique gun nut he is (like myself) I made a deal with him. I traded him my Colt Lightning that I recently got at the show, and I in turn I received this new Ed Brown and some cash. I feel it was a fair trade on both ends. The gun had a sticker price of $2789. The rifle is worth somewhere in the neighborhood of $4250-$4750. He took a little off the price of the 1911, and I went on the low side of the estimated value and a compromise was reached. I'm super excited to have my first custom 1911.
I'll be sending it to my gunsmith to have the barrel crowned, changing the grips to a gorgeous set of Desert Ironwood grips I found for the bobtail and getting a million holsters made for it! Already got my rig set up for some leather lined holsters I've got planned for this guy. I've been experimenting with different techniques to attach the leather to the kydex. I've got very good results so far, but I'm testing my samples for durability right now. I found a few holster companies that line kydex with leather and the techniques used to attach the materials securely seem to be a trade secret. I think the problem lies in adhesive setting time vs the molding time. One solution that I've found that is working absolutely excellent so far is a UV light activated adhesive. Mostly used in clean environments, medical equipment, etc.. and not really any more expensive than other adhesives such as gorilla glue, I can apply it and work my leather into the mold. Once it is set where I want it and shaped, I can apply a UV light and cure the adhesive. Holds incredibly strong and has unlimited working time until you are ready to set it, I think I've figured out their secret for at least found my own way. (sorry, off topic!)
-Adam
(http://i35.photobucket.com/albums/d175/thor447/KobraCarry1.jpg)
(http://i35.photobucket.com/albums/d175/thor447/KobraCarry2.jpg)
And yes, those are Wilson magazines next to it! Hard to beat the old 47D magazine!
-
i'm sure you will be quite pleased.
Nice choice!
-
It appears that your plan is coming together. That will be "one righteous rig." Please post photos of those Desert Ironwood grips when they are installed.
And I agree with you entirely on the Wilson 47D magazines.
-
I sure will Richard. They have been ordered, just waiting on shipment now.
-
Very nice looking EB, Congrats.
-
I appreciate the kind words. I had a few hours tonight of free time so I got started on a holster for the Ed Brown. With all the work I've put in to leather lining Kydex, one would assume that I'd start with that. However, when I pulled the leather out, I decided I'd give my first all leather holster a shot. Attached is a pic of it while waiting of the the dye to dry. It will be molded tomorrow. Hindsight is 20/20 and there are a few things I'd have done differently now that I've gone mostly through my first, but I'm proud of what I have got so far. I think it will turn out just fine after the wet molding tomorrow. -and it's only backwards if your right handed
(http://i35.photobucket.com/albums/d175/thor447/Holsterunmolded.jpg)
-Adam
-
You, my friend, are obviously a man of many skill sets. That is a good looking piece of work in progress. What stitching machine do you use for your leather work.
With regard to kydex, I purchased an unlined kydex holster for my R9 back in 2004 but have literally never even inserted the pistol into it. I just can't seem bring myself to use an unlined kydex holster for any handgun other than, perhaps, a Glock.
-
Thanks Richard. The holster is hand stitched with a thick wax thread. The sales woman at Tandy Leather told me that regular thread has a chemical sealer on it, and that over time that sealer will eventually bleed into the leather and discolor it since dyes now are water based. Good info to know!
-
Just wanted to throw up a picture of the holster - post molding. Turned out pretty well. Decent definition even through the thick 9oz leather.
(http://i35.photobucket.com/albums/d175/thor447/FirstHolsterFinished.jpg)
-Adam
-
That is a beautiful, hand-crafted holster.
-
I appreciate the kind words Tracker, thank you.
The desert ironwood grips came in today. Feast your eyes!!
(http://i35.photobucket.com/albums/d175/thor447/DesertIronwoodGrips1.jpg)
(http://i35.photobucket.com/albums/d175/thor447/DesertIronwoodGrips2.jpg)
-Adam
-
A pair of aces in the hole makes a great draw.
-
Now it's ready for battle or bar-b-que. 8)
-
That's quite a holster - I will talk to my neighbor, who has a custom plastic fabrication shop, if he knows of any adhesives which would bond leather and kydex.
-
Nice kit Thor...great work on the holster too! I shoot an Ed Brown Special Forces 5" .45 and think that it is an incredible pistol...I wish my meager talent was up to the standard of the weapon. Congrats on a fine acquisition.
John
-
Wow, now that package Really PoPs!
-
Very nice piece you have. It looks great. Ed Browns are known for thier finishes. (Side Note: Ed Brown invented the Bobtail for the 1911. Most custom and Semi Custom (Nighthawk, Wilson, et al )Manufactres use his design and in fact puchase them from Ed Brown.
Chief
-
I meant to ask, are those Desert Ironwood grips from Esmeralda? They really set off that Kobra Carry.
-
Thanks for the kind words. They are Sarge's grips. www.thefinergrain.com
-adam