Recent Posts

Pages: 1 ... 8 9 [10]
91
Rohrbaugh R9 (all variations) / Re: Stainless grip screws
« Last post by ccoorreeyy on March 29, 2023, 04:38:13 PM »
I just ordered a pack of 100.  Cost  $18.84 with shipping.  I'll let yall know if they work.
92
Rohrbaugh R9 (all variations) / Re: Stainless grip screws
« Last post by MRC on March 29, 2023, 02:32:17 PM »
I think the size of the screws are:   #3 (3/32") by 48 (48 threads per inch) Countersunk Flat Head for Hex Wrenches by 1/4" long.

Now, where to get them is a big problem, especially if you want stainless.  They are quite uncommon as Eric alluded to.  Good luck.

Added later:

I looked up McMaster-Carr and it looks like they have them.  Please verify my size to be sure.

https://www.mcmaster.com/screws/hex-drive-flat-head-screws/18-8-stainless-steel-hex-drive-flat-head-screws-10/
93
Classifieds -- For Buying or Selling / Re: New on GunBroker
« Last post by ccoorreeyy on March 29, 2023, 02:01:37 PM »
That one is a is a safe queen.
94
Classifieds -- For Buying or Selling / Re: New on GunBroker
« Last post by backupr9 on March 29, 2023, 10:07:52 AM »
Congrats!  EDC or safe queen?
95
Classifieds -- For Buying or Selling / WTB blue grips
« Last post by ccoorreeyy on March 28, 2023, 05:42:52 PM »
Would like to find a pair of original blue cf grips or even a pair of the tribute blue grips.  Let me know if you have some you would sell.
96
Classifieds -- For Buying or Selling / Re: New on GunBroker
« Last post by ccoorreeyy on March 28, 2023, 03:19:13 PM »
I was able to snag that beauty!  Sent the owner a offer and he took it!  Put a set of org black cf grips I had laying around on it.  Sexy gun!!!
97
Rohrbaugh Range Reports / Re: New-To-Me R9 At The Range
« Last post by backupr9 on March 28, 2023, 07:51:56 AM »
Some would recommend that you shoot at least 150 failure free rounds before carrying for self defense, perhaps 20 rounds each time followed by tightening the grip screws and cleaning the weapon.  Your post reminds me that it is past time for me to take my R9 to the range!
98
Rohrbaugh Range Reports / Re: New-To-Me R9 At The Range
« Last post by MikeInTexas on March 28, 2023, 01:56:57 AM »
Gotta love a story with a happy ending :)


.
99
Rohrbaugh Range Reports / New-To-Me R9 At The Range
« Last post by boscobarbell on March 27, 2023, 10:34:01 PM »
So, I finally got my R9 Stealth to the range...twice, as it turns out. 

The story starts with me taking my newly purchased and practically new late-issue R9 Stealth home and giving it a good cleaning while I patiently waiting while some good choices for carry ammo arrived from the e-stores from which I bought them.   I ended up going to the range with Gold Dots, ARX Inceptors, Federal HSTs, and Sig V-Crowns...but I never got to try them all.

I shot a couple of mags of the ARX rounds (which my previous R9 loved), but had a few FTF issues and moved on.

Speer Gold dots had a different problem: they would properly extract.  And the last of those failures was the worst still: it was stuck in the throat of the barrel so tightly that I could extract it at the range.  When I got it home I used a dowel to pound it out, and was alarmed to see that the case was not only badly swollen but also split longitudinally  Not good.

I spoke to a local gunsmith about it, and he feared the worst about my barrel, guessing that it was out-of-spec.  I feared that I a $1200 paperweight at this point, but I ended up talking at length with Eric Rohbaugh, who patiently went over what he thought may the possible causes, and what he recommended I could do moving forward.  We decided that the best course of action was to give the pistol a good cleaning and try it one more time at the range before throwing in the towel. 

So, today I got it out again.  This time I brought the Remington HST ammo, along with Sig V-Crown and Underwood Xtreme Defender.  As it turns out, I only shot the HST.  This time, it was because it cycled perfectly, and I was so excited with that success that I put 30 rounds downrange to ensure that all was well, and then quit while I was ahead and before I got the gun too cruddy and inviting failures. 

I can now only assume that I had a bad batch of Speer Gold Dots on my first trip...maybe week casings that lead to bulging/splitting?  Regardless, it's nice to know it was the ammo and not the gun.  Phew!!   

I've got more Speer inbound to give them another try, and next time out I'll finally test out the Underwood and V-Crown ammo as well.

Regardless, though, I've got a fully functioning R9 and a decent self defense round to feed it.  All is good with the world!   8)
100
Rohrbaugh R9 (all variations) / Re: Stainless grip screws
« Last post by boscobarbell on March 27, 2023, 10:11:32 PM »
Gonna bump this and hope for some responses.

Does anyone know the size, specs, etc of the original grip screws.  I'm going to start stocking up on parts that are likely to need replacing and/or prone to breaking, and grip screws would be amongst those. I know I was able to buy a box of replacement screws for my Remington RM380...it was not a particularly uncommon size, and I just bought a box of 100 or so for, if memory serves, like $25.  That certainly would be the way to go if these screws aren't proprietary to the Rohrbaugh.

Check out this old thread.  About halfway through the second page the conversation turns to grip screws.
http://www.rohrbaughforum.com/index.php?topic=9268.15

So it is 1/16", but I would still need to know the recommended length, correct?

Pages: 1 ... 8 9 [10]