Author Topic: Extractor problem?  (Read 15067 times)

Offline kevinqjhps

  • Grand Master
  • *****
  • Posts: 677
  • New Member
Extractor problem?
« on: July 07, 2017, 06:06:18 PM »
I have a problem that I THINK??? is related to the extractor. After firing 12-15 rounds I get a fired case hung half way up in the barrel with a new round trying to feed from the mag. This obviously locks things up.

The only way to free things up it to turn over, press the mag release and with a padded screwdriver pry the mag out. This releases the mag with remaining rounds, and leaves the fired case in the chamber. 

This seems to only happen after 2-3 mags if this helps.

Any ideas? Thanks in advance.


kevinqjhps
USMC
Disabled Vet
NRA
Second Amendment Foundation
FORMER Cincy Bengals fan
Three times a week shooter
Indy resident

Those who disrespect the American flag have never been handed a folded one

Offline tracker

  • Grand Master
  • *****
  • Posts: 5392
Re: Extractor problem?
« Reply #1 on: July 07, 2017, 07:22:48 PM »
Did this occur with the same magazine or different magazines?

Offline kevinqjhps

  • Grand Master
  • *****
  • Posts: 677
  • New Member
Re: Extractor problem?
« Reply #2 on: July 08, 2017, 08:25:25 AM »
Did this occur with the same magazine or different magazines?


BINGO!!!! Great minds think alike. ;D ;D ;D I was thinking about this last night. I usually bring 4-6 mags along and it doesn't happen till the second or third mag. Monday, range day, I will start marking the mags. Thanks.


p.s. I field stripped it, cleaned it well, and replaced the recoil spring. 
« Last Edit: July 08, 2017, 08:26:58 AM by kevinqjhps »
USMC
Disabled Vet
NRA
Second Amendment Foundation
FORMER Cincy Bengals fan
Three times a week shooter
Indy resident

Those who disrespect the American flag have never been handed a folded one

Offline tracker

  • Grand Master
  • *****
  • Posts: 5392
Re: Extractor problem?
« Reply #3 on: July 08, 2017, 09:34:07 AM »
Also, make sure you let it cool between magazines.

Offline kevinqjhps

  • Grand Master
  • *****
  • Posts: 677
  • New Member
Re: Extractor problem?
« Reply #4 on: July 08, 2017, 12:43:22 PM »
Also, make sure you let it cool between magazines.


That may the problem showing up on the second or third mag.
USMC
Disabled Vet
NRA
Second Amendment Foundation
FORMER Cincy Bengals fan
Three times a week shooter
Indy resident

Those who disrespect the American flag have never been handed a folded one

Offline tracker

  • Grand Master
  • *****
  • Posts: 5392
Re: Extractor problem?
« Reply #5 on: July 10, 2017, 04:12:05 PM »
That is a distinct possibility; give it at least two to three minutes between mags. As someone here wisely observed a cool gun is usually the one used in self defense.

Offline ECR

  • Grand Master
  • *****
  • Posts: 1740
Re: Extractor problem?
« Reply #6 on: July 12, 2017, 07:35:33 AM »
Please keep us posted here Kevin with your findings. I am watching this thread (and all threads for that matter. lol)

Carry on...................
Makers of the NRA Shooting Illustrated: "Handgun of the Year for 2005" and receiver of an NRA Golden Bullseye Award.

Offline kevinqjhps

  • Grand Master
  • *****
  • Posts: 677
  • New Member
Re: Extractor problem?
« Reply #7 on: July 12, 2017, 12:42:03 PM »
Please keep us posted here Kevin with your findings. I am watching this thread (and all threads for that matter. lol)

Carry on...................




Tracker hit it first. ;D ;D ;D ;D ;D ;D ;D ;D   The reason it took so long to get back on this is because I usually bring 6-7 mags and usually two different R9's. It would jam in ONE gun  on ONE mag and only then some of the time.

Thanks again Tracker.

I have moved the 'bad' mag to my junk gun bag and it LOOKS like all is well. 
USMC
Disabled Vet
NRA
Second Amendment Foundation
FORMER Cincy Bengals fan
Three times a week shooter
Indy resident

Those who disrespect the American flag have never been handed a folded one

Offline tracker

  • Grand Master
  • *****
  • Posts: 5392
Re: Extractor problem?
« Reply #8 on: July 12, 2017, 12:46:41 PM »
Great to hear the good news on a simple solution, Kevin; happy to be of assistance.

Offline cargaritaville

  • Grand Master
  • *****
  • Posts: 1081
Re: Extractor problem?
« Reply #9 on: July 12, 2017, 12:48:47 PM »
I have moved the 'bad' mag to my junk gun bag and it LOOKS like all is well.


Williams will replace the defective mag with a new one.
« Last Edit: July 12, 2017, 04:22:44 PM by cargaritaville »
Having a gun in your hand is much more effective than having the entire police department on the phone!

Offline ECR

  • Grand Master
  • *****
  • Posts: 1740
Re: Extractor problem?
« Reply #10 on: July 12, 2017, 04:20:19 PM »
Ahhhhh . . . . . . All is well in Tierra del Fuego!

Good to hear.

ecr
Makers of the NRA Shooting Illustrated: "Handgun of the Year for 2005" and receiver of an NRA Golden Bullseye Award.

Offline kevinqjhps

  • Grand Master
  • *****
  • Posts: 677
  • New Member
Re: Extractor problem?
« Reply #11 on: July 13, 2017, 01:40:29 PM »
I have moved the 'bad' mag to my junk gun bag and it LOOKS like all is well.


Williams will replace the defective mag with a new one.




Thanks for the tip.
USMC
Disabled Vet
NRA
Second Amendment Foundation
FORMER Cincy Bengals fan
Three times a week shooter
Indy resident

Those who disrespect the American flag have never been handed a folded one