The Rohrbaugh Forum
Rohrbaugh Products and Accessories => Cleaning and Maintenance of the R-9 => Topic started by: kevinqjhps on July 07, 2017, 06:06:18 PM
-
I have a problem that I THINK??? is related to the extractor. After firing 12-15 rounds I get a fired case hung half way up in the barrel with a new round trying to feed from the mag. This obviously locks things up.
The only way to free things up it to turn over, press the mag release and with a padded screwdriver pry the mag out. This releases the mag with remaining rounds, and leaves the fired case in the chamber.
This seems to only happen after 2-3 mags if this helps.
Any ideas? Thanks in advance.
kevinqjhps
-
Did this occur with the same magazine or different magazines?
-
Did this occur with the same magazine or different magazines?
BINGO!!!! Great minds think alike. ;D ;D ;D I was thinking about this last night. I usually bring 4-6 mags along and it doesn't happen till the second or third mag. Monday, range day, I will start marking the mags. Thanks.
p.s. I field stripped it, cleaned it well, and replaced the recoil spring.
-
Also, make sure you let it cool between magazines.
-
Also, make sure you let it cool between magazines.
That may the problem showing up on the second or third mag.
-
That is a distinct possibility; give it at least two to three minutes between mags. As someone here wisely observed a cool gun is usually the one used in self defense.
-
Please keep us posted here Kevin with your findings. I am watching this thread (and all threads for that matter. lol)
Carry on...................
-
Please keep us posted here Kevin with your findings. I am watching this thread (and all threads for that matter. lol)
Carry on...................
Tracker hit it first. ;D ;D ;D ;D ;D ;D ;D ;D The reason it took so long to get back on this is because I usually bring 6-7 mags and usually two different R9's. It would jam in ONE gun on ONE mag and only then some of the time.
Thanks again Tracker.
I have moved the 'bad' mag to my junk gun bag and it LOOKS like all is well.
-
Great to hear the good news on a simple solution, Kevin; happy to be of assistance.
-
I have moved the 'bad' mag to my junk gun bag and it LOOKS like all is well.
Williams will replace the defective mag with a new one.
-
Ahhhhh . . . . . . All is well in Tierra del Fuego!
Good to hear.
ecr
-
I have moved the 'bad' mag to my junk gun bag and it LOOKS like all is well.
Williams will replace the defective mag with a new one.
Thanks for the tip.