The Rohrbaugh Forum
Rohrbaugh Products and Accessories => Gunsmithing or Modifications for your Rohrbaugh => Topic started by: Josey Wales on January 02, 2010, 07:10:26 AM
-
Hello and Happy New Year!
Who would you suggest that would be able to offer front and back strap checkering with refinish to the frame of an R-9 Stealth.
Does anyone have a picture of this done to your beauty?
My hands are big and getting arthritic I would feel much better with some added help holding on to my R-9.
Thanks!
On edit, I just saw Coreys post and will look into it further.
-
JW:
Welcome to the Forum!
-
The checkering adds lots of grip and is very pretty! The r9 I currently carry is stippled and that seems to add almost as much gripping help but at a MUCH lower price. The checkered grips help alot to if you don't have those it would be my sugestion to start with those and you may find it to be enough.
Welcome!
Corey
-
Thank you Richard.
Corey,
I looked up stipple and I reckon that would be a good alternative. If you don't mind, who did yours and do you have any pics?
Thanks
J.W.
-
Bob Cogan did it also. Same fellow that did the checkering on the other one. He does fantastic work. I'll have to take a few pictures. I can't find any right now.
Corey
-
OK, I just took a few so here you go.
(http://i181.photobucket.com/albums/x275/ccaallaahhaann/custom%20II%20R9/PICT2272.jpg)
(http://i181.photobucket.com/albums/x275/ccaallaahhaann/custom%20II%20R9/PICT2296.jpg)
(http://i181.photobucket.com/albums/x275/ccaallaahhaann/custom%20II%20R9/PICT2298.jpg)
And if you decide to get stippleing over checkering you can use the cash saved to stock up on ammo!
(http://i181.photobucket.com/albums/x275/ccaallaahhaann/custom%20II%20R9/PICT2281.jpg)
-
Thank You Corey for going out of your way to post these pics.
I reckon I'll seek stippling for my Stealth along with new grips :)
-
I'm interested in doing the stippling on my stealth. Does it have to be sent back to the factory to be re-finished afterward or can a gunsmith refinish it? thanks
-
I'm interested in doing the stippling on my stealth. Does it have to be sent back to the factory to be re-finished afterward or can a gunsmith refinish it? thanks
I'm willing to bet money, marbles or chalk that the frame on a stealth is hard anodized and maybe has a clear coat over it. I know of nobody who is a smith who has the facility to do hard anodizing. I haven't been inside the rohrbaugh to see what it's got for pins etc that are permanent or semi permanent inside, but in order to anodize (hard or otherwise) all steel has to be removed prior to the process. That's why most companies that have guns done, refuse to offer refinish on black, hard anodized frames. That includes Colt, S&W, and SIG for starters.
There is a company out in California that I heard about that does it but they charge money by the lb to do pistol frames and you must remove all steel prior to their involvement. Bill Bassett of Bassett Tool and Machine in Dripping Springs, TX, told me he had his LW Commander redone by the folks who do his M1A scope mounts for him, but he had to remove all the steel parts and I haven't seen it or have any knowledge of how good a job they did. His scope mounts look great. If you call him he would probably tell you who they are and whether they might do it. He's a friend of mine and he speaks the truth if you call him, but he is an old curmudgeon so expect it. Tell him I said so.
-
Here is checkering and chrome plating done by Cogan.
[im(http://i1113.photobucket.com/albums/k515/Wolverine_450/Guns/51066940.png)g][/img]
[im(http://i1113.photobucket.com/albums/k515/Wolverine_450/Guns/a67c67c3.png)g][/img]
[im(http://i1113.photobucket.com/albums/k515/Wolverine_450/Guns/ea1f6cfa.png)g][/img]
-
It wouldn't be cost effective for a gun smith to operate and maintain an anodize setup. Another issue would be zoning laws were there shop is located, although they can do there smith work the chemicals involved for anodize would create other issues.
-
It seems this thread does not have closure. Does anyone have a picture of a stealth that's had front and backstrap checkering or stippling? I would imagine they just use some type of impact tool to do stippling and that might not do too much of a number on the original black finish... or would it?
-
The more i see, the more I belive Cogan is the way to go...but I have the same questions about the Stealth...I meant to call him this week and inquire, but just didn't find the time.
-
Is this the same man that had a shop in Tampa FL years ago? If so, he did some A+, excellent work for several of my guns at that time. Ricardo
-
I took my pup to my gunsmith and he recomended stimpling as well for added saving over checkering but was a little leary over the thin aluminum frame of the front strap, any thoughts? don't want distort the shape of the inner mag well......
-
Does stipling take more metal off than checkering?