Rohrbaugh Products and Accessories > Rohrbaugh Accessories

home made tools

(1/4) > >>

bamboobob:
tools
wedge -  good to remove barrel pin
PVC better,       especially better to replace pin
spring portion  of tool     thinner -  better       tapered probably better   2ed one thicker see pic #2

pin pusher     hex wrench OK  but steel on steel and near al.     aluminum rivet  was steel did not try
10 ga. copper  seems perfect  yet to try   squared off end / smoothed

PVC  -   slots in hole to remove small part ( sanded not to fit too tight! )

Brenden:
Nice adaptation to help with the Pups dis-assembly/assembly! Wish I had your ability to just keep trying things!
Good job.  8)

bamboobob:
Brenden,

Thanks for the encouragement, It was mostly about having the right stuff then finally doing it.
Sawing by hand and lotsa lotsa filing and sanding was very hard.
I cut 2 more with band saw / new blade (made that step easier )

Finally stumbling on right PVC pipe (for small ring ) made that tool way better.

Now  "Pups dis-assembly/assembly"  super fast and easy.


 

tracker:

For the pin pusher I suggest a brass punch. You are right about the tools; they really simplify the process and alleviate the frustration that squares with each failed attempt.

bamboobob:
Tracker -  brass sounds great
but 10 ga. cu.  was easy to find

  more  -   three new ones

need to test these 4 but sure they will work.

Navigation

[0] Message Index

[#] Next page