The Rohrbaugh Forum
Miscellaneous => Classifieds -- For Buying or Selling => Topic started by: Xtremedb on August 10, 2015, 05:37:17 PM
-
THESE ARE PRICED TO GO.... have a barrel in 9mm both black and stainless, and have a 380 barrel in stainless. Also have a slide for 380 in stainless, that is complete minus the barrel and recoil spring assembly. Barrels are 100.00, slide is 150.00 the auction sites do not command the attention of what I have. So to the followers, I offer them here. Email direct is best as I only did this to sell my parts.
-
Very interested but were is your email? Dwizib@earthlink.net. Please send pics of all for sale
-
Xtremedb - Welcome to the forum.
In the past, I have been somewhat protective of people joining the forum only to market stuff to our members. However, things have changed a lot, and I do want our members to have access to parts and such if they need them.
However, I am curious how you came to have these parts. Are you an insider at Rohrbaugh or Remington? To my knowledge, Rohrbaugh Firearms never sold barrels or slides as parts. Where did these come from?
-
Duane I still haven't heard back from him. Maybe a one time post?
-
He has them listed on ArmsList also Maybe you can contact him there.
-
No longer listed there. ???
-
No longer listed there. ???
http://www.armslist.com/posts/4562842/south-carolina-handguns-for-sale--rohrbaugh-r9-and-r380
-
Ok, it seems someone hooked in with the Remington purchase has access to the parts and has decided to sell some of them. I wish them well. The parts are good parts. Those were part of our stock. Ecr
-
Sorry, figured as every forum they were accessible via a email contact as in the AR forum. Yes they were available on armlist, guess since I caught your interest its time for pics, I will work on that today. I tend to buy things I see value in, sometimes it pays off sometimes it does not. I had all but given up on interest in these and haven't checked in a while. Responses inbound.
-
Ok tried to post a pic from mobile, so any of the guru's out there want to help feel free.
http://i60.tinypic.com/ig9p8j.jpg%5B/IMG%5D
-
Here goes my try.
-
Thanks ERC, my laptop WOULDNT even let me into the option so I just sent the link.
But since I have the spotlight I also have a matching set for the 380, slide and barrel that will be the holdout IN BLACK, see my trades.
1911 para parts, DS frames especially
Ksg
Or even tell me what you got, I'm a diehard for glock and AR and while all my 1911's run like a champ they do so with very fine tuning so let's focus on build parts. I own quite a few "only one in the world pistols" and I have made them this way, so a parts a part until it's fine tuned with a 1911.
-
Ahhhhhh ha!. . . . . . Your initials! Now I know who this is. . . . . . lol. These parts are our stock from the deal and are all good guys. If you need anything, this could be a good connection for you all. So, K-Man. . . . . when will the RM380 actually be out in the stores for purchase. . . . . I want one too! lol
Eric R.
-
ECR
I have a R9 with a barrel that came with the "reamer marks" from your shop.
How much fitting is required to replace the barrel?
-
It should drop right in. If it doesn't fit easily into the front of the slide, you may have to use some emery cloth to sand the outside of the barrel cone (front part) to make it fit. The other thing is you may have to file the top of the rear part of the barrel to fit your slide. Other than that, it should be good to go. These were all hand fit barrel to slide setups on the R9s. ;)
-
Can I get an email address?
-
It should drop right in. If it doesn't fit easily into the front of the slide, you may have to use some emery cloth to sand the outside of the barrel cone (front part) to make it fit. The other thing is you may have to file the top of the rear part of the barrel to fit your slide. Other than that, it should be good to go. These were all hand fit barrel to slide setups on the R9s. ;)
Thanks Eric, that is what I thought but it's better to check first.
-
It should drop right in. If it doesn't fit easily into the front of the slide, you may have to use some emery cloth to sand the outside of the barrel cone (front part) to make it fit. The other thing is you may have to file the top of the rear part of the barrel to fit your slide. Other than that, it should be good to go. These were all hand fit barrel to slide setups on the R9s. ;)
Thanks Eric, that is what I thought but it's better to check first.
No problem. If you decide to get a part and need advice on installation tips, give me a shout.
Tat ~ Who's email are you looking for?
-
It should drop right in. If it doesn't fit easily into the front of the slide, you may have to use some emery cloth to sand the outside of the barrel cone (front part) to make it fit. The other thing is you may have to file the top of the rear part of the barrel to fit your slide. Other than that, it should be good to go. These were all hand fit barrel to slide setups on the R9s. ;)
Thanks Eric, that is what I thought but it's better to check first.
No problem. If you decide to get a part and need advice on installation tips, give me a shout.
Tat ~ Who's email are you looking for?
the guy selling the parts here
-
Tat,
All you have to do is click on "Xtremedb" to view his Profile. There, look under Actions: and then click on: Send Private Message. That's his "email" . . . . You can communicate with him there back and forth about the parts he has for sale.
Eric
-
PM sent!
-
I've responded to all IM's guys or gals who are interested.
-
Good to hear. . . . . .
-
All parts still available, ECR was kind enough to post pics for me, if you can't see them in the thread just click the tiny pic link a few responses back and they will are viewable. This is my pre weekend check in, all IMs have been responded too thanks.
-
PRICE REDUCTION BUMP
-
1 barrel sold, all the rest is still available.
-
THESE ARE PRICED TO GO.... have a barrel in 9mm both black and stainless, and have a 380 barrel in stainless. Also have a slide for 380 in stainless, that is complete minus the barrel and recoil spring assembly. Barrels are 100.00, slide is 150.00 the auction sites do not command the attention of what I have. So to the followers, I offer them here. Email direct is best as I only did this to sell my parts.
Well I see the 380 barrel and slide are on the auction sites (eBay and GB), so we will see what kind of attention they command there... Good luck with your sale Sir! Thank you for kindly offering them here first.