The Rohrbaugh Forum
Miscellaneous => Other Guns => Topic started by: geminidan on December 08, 2005, 02:26:15 PM
-
How do I load pictures to share of my new Colt Pony pocketlite, all enhanced with a meltdown and accuracy package???? Geminidan
-
Dan - no attachment facilities here so - you'll need to host pics and then use URL to dis[play them.
Try this - if you can size pics first to 640x480 sorta size and compress so maybe 60-100k and no bigger (helps dial-up fol;ks).
Then try and host them in Imageshack, photobucket - or just do a search on ''free image hosting''.
Once they are ''up there'' - you then need the URL of a given pic (right click ''properties'' will usually tell you if needed).
Then - place that URL inside ''img'' tags. See the lil picture icon fourth in from left, bottom row in message reply window? Hit that and you get the tags - or type them. Note they will have squiare braces but if I use curlies then you may enter something like -
{img}www.yourpichost/yourfolder/danpic.jpg{/img}
See how you get on - shout if needed.
-
Hey geminidan did they lighten up the trigger pull? The trigger on my pony is a bear.
-
The whole gun was done over, trigger pull has been lightened up
crowned barrel
s/s guide rod, wolf springs,
flattened front of slide in front of sights
relieve metal under trigger card for higher grip
round mag well and recontour grips
20 lpi in front strap
polished and throated
re -bead blast , and resprayed frame
heavy duty mag-release spring-checkered
siide stop flattened and checkerd, and something done to end of it where fits back into frame......cannot post pictures but If you need to see.send email I can attach them..Geminidan
-
The whole gun was done over, trigger pull has been lightened up
crowned barrel
s/s guide rod, wolf springs,
flattened front of slide in front of sights
relieve metal under trigger card for higher grip
round mag well and recontour grips
20 lpi in front strap
polished and throated
re -bead blast , and resprayed frame
heavy duty mag-release spring-checkered
siide stop flattened and checkerd, and something done to end of it where fits back into frame......cannot post pictures but If you need to see.send email I can attach them..Geminidan
Hi Geminidan...
I recently purchased both a Colt Mustang and Colt Government madel, both in .380. The Mustang had work done to it by the previous owner, and is one sweet shooter. The Government model was NIB, so I got to put the first shots through it...and it too shot well. Still...I would like to have it overhauled by someone who knows what they are doing...get a metal, full length guide rod, etc.
Can you reccoment a good gunsmith who might work on my Government .380...? Any and all help very much appreciated...!...TW<<
-
The gunsmith's name is Bob Munck
The Company name is Showgun
He is out of Florida, He just got rid of the cheap screws in the "R9" and replaced and re tapped with heavy duty s/s torx screws that will not gall...........He has done many guns for me in the past and they have all functioned much like a jeweled watch, even my little keltec 32,,,,,,,,,,,He is about to install sights and guide rods and springs and polish and throat the ramp on my new glock 34...he can be reached at
954-647-2926.........he does not pick up phone if he does not recognize the number so leave him a message and say his "dinky Dau Bro Dan" gave you his number......Regard.s...and let me know what happens.ps.he specializes in parts and customs on colts.....................