The Rohrbaugh Forum
Rohrbaugh Products and Accessories => Rohrbaugh Accessories => Topic started by: IDM on November 26, 2007, 06:28:27 PM
-
Hey All!!
I have recived the OK From RJ to produce and sell the 2 in 1 takedown tool ;D
I would like to thank him and his help to bring this little tool back to life!!
I told him it would now be called the "RJ tool"
Im selling them on my store front on Ebay.
Here is the link.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320188151345
Thanks
Bryce
IDM
(http://i220.photobucket.com/albums/dd131/IDMLLC/100_1613a.jpg)
-
+1 on the RJ Tool. All newbies to the R9 ought to do themselves a favor and grab one!
-
Alunimum I assume ;)
RJ did 2 runs of tools,brass also..
Looks good..
Brenden
-
I don't do PayPal for reasons that would take too long to explain. Can you post a regular address where we can send a postal money order to?
And would it still be $22 total?
-
Yes I understand about the paypal thing. I too have had issues in the past. :-/
$22 total
Check or money order to IDM or Bryce Proctor
send to:
Bryce Proctor
Po Box 3398
Post Falls, Id. 83877
Thanks
Bryce
-
Yes aluminum. I looked at the brass and thought that the cost was to great for the job at hand. Alu seems to work just fine. but Im always open, if people want brass I can do a short run.
Thanks
Bryce
Alunimum I assume ;)
RJ did 2 runs of tools,brass also..
Looks good..
Brenden
-
My takedown tools arrived today. Thank you for the quick turn around.
-
Have any on Gunbroker or Auction Arms? I'm sure alot of folks would rather support them than anti-gun FeEbay if at all possible. 8)
Looks great, thanks for bringing these tools back!
-
Thanks for the input!
I understand the Ebay thing. I have a ebay store front to sell my car stuff so it was a easy choice to put it there. Ebay made 3 cents from me to put it on the store. No amount of the $22 cost gose to the Ebay giant.
I Also am on Gunbroker but anyone looking for a takedown tool will no doubt come here first. I would hope anyway.
I may put them on Gunbroker to see what happens.
Thanks
Bryce
-
Sure thing. I'm not saying you shouldn't have them on Ebay because of the anti-gun thing, I just thought you could put them on Gunbroker as well. So that people who see them on here could use Gunbroker instead if they have an account there.
Thanks again for making these tools!
-
Bryce,
I received the mag extensions (excellent workmanship) and the shipping refund. Thanks.
At the risk of sounding clueless, can you post something here on the proper use of the RJ Tool?
Don't want to risk injuring my pup through operator error.
Roy
-
Glad you got the extentions!!
Im not the expert on the tool!! RJ HEDLEY is the designer.
I would take some pics but I have my pup torn down to the bone!! I know some where on the forum there are some details about the tool and some pics.
Here are the pics that Rj sent me.
(http://i220.photobucket.com/albums/dd131/IDMLLC/Bronze20tools20006.jpg)
(http://i220.photobucket.com/albums/dd131/IDMLLC/Take20down20-20reassembly20Tool2000.jpg)
If you still need some help let me know thanks
Bryce
-
I just ordered the tool from eBay. Thanks
-
I tried to buy your tool on ebay but had trouble with pal pay. my ebay name is davidjg421. I wil mail you directly
-
IDM, I think it is wonderful that you picked up where RJ left off due to his health, and the fact that you named the tool in his honor.
I have one already and it works great.
Thanks for keeping the tool alive.
-
I have received my RJ TT and have reordered two more!
Many thanks.
Ron
-
Ron many thanks
Im running a little behind. I hpoe to have them out this Wed.
Thanks
Bryce
-
E-Bay shows the item has ended. Are more available? Is brass a possibility?
Thanks,
Rick
-
E-Bay shows the item has ended. Are more available? Is brass a possibility?
Thanks,
Rick
They are still available. Try this link.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320210715582&ssPageName=MERC_VIC_RCRX_Pr4_PcY_BIN_Stores_IT&refitem=320188151345&itemcount=4&refwidgetloc=closed_view_item&usedrule1=CrossSell_LogicX&refwidgettype=cross_promot_widget
-
So I have a silly question. How do these tools assist with disassembly? I do not find it difficult to tear down with a simple punch and pliers. If I am missing something I would surely spend 20 bucks on a all in 1 tool.
-
I am sending you a check today for one! Thanks Corey
-
Got it! Thanks
-
Do you still have these and can you describe in brief the function of this tool. I have just ordered my first R9.
thanks
RJ
-
Im going to be shuting the ebay thing down soon.
I now have a web site that i have been working on the last few weeks.
It is now up and running.
Problem is now having a hard time keeping up stock of all items. :-[
Check it out when you have a chance.
http://www.idmparts.com
Thanks
Bryce
-
How about an RJ Tool in Damasteel?
That would be nice.
-
well possible but vary $$$$.
Not sure I would want it. It is harder than the stainless on the gun. The purpose of alum or brass is, it is soft and wont hurt the gun.
Bryce
-
IDM-
If Damasteel is too hard how about offering the tool in brass?
RJ offered it and the price was reasonable.
Thanks
-
Brass Rj tools are in stock.
Bryce
www.IDMparts.com
-
I just got my brass tool. It is indeed a lovely tool. And I love it in brass.
Bryce, thanks for the wonderful tool. :)
-
Thanks Glad you like it!!
And glad you didnt say "Bryce your a TOOl!!"
;D
Bryce
-
Thanks Glad you like it!!
And glad you didnt say "Bryce your a TOOl!!"
;D
Bryce
I would never call you a tool. I consider a tool a useless jerk off worthy of nothing but a stinky well-directed fart.