The Rohrbaugh Forum
Rohrbaugh Products and Accessories => Rohrbaugh Accessories => Topic started by: doctordun on February 26, 2010, 11:07:43 PM
-
I need one that keeps the R9 high and tucked close to the body.
I have an AKER for my Sig P220 that does a great job keeping it close.
I am also interested in a neck holster for my R9.
Any suggestions on where I might look or who might custom make one?
As a side note: I had two holsters ordered and paid for from Pale Horse that were supposed to be from Graham Holsters. After 2 years of waiting, I found out that Pale Horse and Graham had some kind of falling out. Bottom line is that I lost my money with no recourse.
A real bummer.
-
doctordum. I would contact Robert at Meco Holsters. He can make what you want. The pictures on this link are pocket holsters, but give him a call or email. Just tell him what you want.
http://mecopocketholsters.com/rearpocket.htm
Or Jim at hiddenholsters@yahoo.com. Here's a Forum link with his email address and phone number. Go to page one for a picture of one of his holsters.
http://www.rohrbaughforum.com/YaBB.cgi?board=Accessories;action=display;num=1233665411;start=15
-
is this what your looking for?
(http://i164.photobucket.com/albums/u24/calilw/sell/CIMG0744.jpg)
(http://i164.photobucket.com/albums/u24/calilw/sell/CIMG0746.jpg)
(http://i164.photobucket.com/albums/u24/calilw/sell/CIMG0749.jpg)
-
Pretty much.....
Where?
-
It does look like it gets the job done.
-
his name is Jack Bender ph# 636-207-7793 email jbcustom-leather@att.net ... he's a retired police officer and works out of his home so please be respectful of that. i did talk to him about posting his phone number before doing so. so he knows there is some out of town interest in his work. he currently resides on the west side of st. louis.
-
callw,
That is an excellent looking rig. Really does keep the Pup high and tight. That would work for me. I like it.
-
doctordun, read where you were looking for a neck holster for an R9 (among other things). I had no idea that they made such a thing. Anyway, if you get any information concerning them, I would very interested in hearing about it. Thank you , Gene
-
Gene. Here are some just to give you an idea on the neck holster. None for an R9, but I'll bet Robert or Jim could make one.
http://www.stellarrigs.com/gun_neckchain_rigs.html
One of these might be good for the car. :-/
-
doctordun, read where you were looking for a neck holster for an R9 (among other things). I had no idea that they made such a thing. Anyway, if you get any information concerning them, I would very interested in hearing about it. Thank you , Gene
I have one for my Keltec and my NAA .22Mag. I hardly notice them anymore. I was wanting something for my Rohrbaugh for more firepower.
-
Thanks KT & doctordun. KT, appreciate the link. Gene
-
Talked to Robert Locke on the phone this evening on this subject. As as 'one man' custom shop, he is working on a new design for another customer for just this kind of design. I've just asked to be included on his email list, so that when this actual product is produced, he'll email photos, specs and prices to those interested. In order to prevent an 'overload' on requests for information, quotes, etc. all from one really, really nice professional guy producing 'one-of-a-kind' handmade products, maybe we can all figure out a way to best forward these requests to him. I guarantee you, he reads this forum and every single email sent. Perhaps if those interested in this design could just email him and request the images/specs/quotes when the 'first one' is completed, we can all let him do his work, and not overwhelm him with requests...
All my regards to you all, a terrific community.
-
Talked to Robert Locke on the phone this evening on this subject. As as 'one man' custom shop, he is working on a new design for another customer for just this kind of design.
Are you referring to just the Belt Holster?
-
Take a look at our holsters at http://www.remoraholsters.com
We make 5 models that will work with the Rohrbaugh:
1XSMA2 - Hold just the gun in the holster.
1XSMA3 - Holds a gun with added accessories or for those that like a looser fit.
1XSMALP - The gun sits lower in the holster and exposes more of the grip (new product - not in the online store yet, will have to fill out the contact form on the website)
1XSMAWM - Holds the same guns as the 1XSMA3, but with an extra mag pocket.
1XSMAAH - Holds the same guns as the 1ZSMA2, but has velcro attached to use with the velcro leg strappings. Can be used as a pocket holster also.
-
Talked to Robert Locke on the phone this evening on this subject. As as 'one man' custom shop, he is working on a new design for another customer for just this kind of design. I've just asked to be included on his email list, so that when this actual product is produced, he'll email photos, specs and prices to those interested. In order to prevent an 'overload' on requests for information, quotes, etc.
Is anyone aware of any updated info on this design?? I would be interested in possibly an exotic skin! ;D
-
You can get one from Rafter S, it is top quality, but expect to wait.
This one is Elephant with Croc trim.
(http://i413.photobucket.com/albums/pp216/yankee2500/R9holster001.jpg) (http://i413.photobucket.com/albums/pp216/yankee2500/R9holster002.jpg)
John
-
Thats a very nice holster John!
I e-mailed Rafter S days ago and no response!
-
I always called them and had pretty good luck that way, they don't seem to be as good with there CS as they are at making holsters.
John
-
I like the one with the green belt attached. I would like to carry my Pup in the appendix carry spot. & it being inside the belt with two connection would make it very stable. Where could I get one that would carry on my right front side & be on the inside of my belt?
-
cordy. Here is a link to a post from John here on the Forum and may be what you need.
http://estore.websitepros.com/1565531/Categories.bok?category=IWB++w%2FBelt+Loop+For+Guns+A-R
-
A former partner of Lou Alessi is making holsters at Lou's old place now called Richie Leather Co inc.The owner 'Skip' carried a R-9 and has owned one for many moons and is making me my first holster for my R-9.He can do most anything and he is open to suggestions if you want quality go that way.I have a new one from him for my Glock 23 inside the pant and it is true quality.I might post the new R-9 holster if I can do pic's here.
-
I'll look for your pictures
-
I'll vouch for Lou Alessi and all who come after him, like Skip.
-
Sorry but I cant seem to remember how to even load the photobucket thing [ FKing pissed am I ] so no pics till I get over the ADD thing or old age !.
-
I have a new one from him for my Glock 23 inside the pant and it is true quality
If you can, post a pic for the Glock 23 iwb also :)
-
If you can, post a pic for the Glock 23 iwb also :)
If I could I would gladly !!.
-
This link may help.
http://www.rohrbaughforum.com/YaBB.cgi?board=news;action=display;num=1234494365