The Rohrbaugh Forum

Rohrbaugh Products and Accessories => Rohrbaugh Accessories => Topic started by: Jack Foulard on March 04, 2008, 10:38:38 PM

Title: Who wants a brass RJ takedown tool?
Post by: Jack Foulard on March 04, 2008, 10:38:38 PM: I emailed with Bryce and he said that he could do a run of brass RJ takedown tools if there was interest.

I definately want one!

Who else wants one? It could be helpful if we posted here to define the interest.

Thanks
Title: Re: Who wants a brass RJ takedown tool?
Post by: mcop511 on March 05, 2008, 12:01:57 AM: I'm down for one or two.
Title: Re: Who wants a brass RJ takedown tool?
Post by: RickP on March 05, 2008, 10:29:39 AM: Me too!

Rick
Title: Re: Who wants a brass RJ takedown tool?
Post by: Jack_Bauer on March 05, 2008, 11:53:42 AM: I'm in.
Title: Re: Who wants a brass RJ takedown tool?
Post by: jerseyboy on March 05, 2008, 08:36:02 PM: Put me down for one. Can you use the tool on the new.380 ?
Thanks

On second thought I could use 2

I assume that it will fit the .380
Title: Re: Who wants a brass RJ takedown tool?
Post by: dawkind on March 05, 2008, 10:16:35 PM: I'd take one.... 8)
Title: Re: Who wants a brass RJ takedown tool?
Post by: jeffgraham on March 07, 2008, 02:48:57 AM: I'll take at least 2, probably 4.
Title: Re: Who wants a brass RJ takedown tool?
Post by: tom_t. on March 07, 2008, 03:46:54 PM: Ill take one also.
Title: Question for Bryce:
Post by: Jack Foulard on March 07, 2008, 07:28:27 PM: Considering that I'd take 2, we are up to 13 possibly.

Bryce, how many do you need to make another batch?
Title: Re: Who wants a brass RJ takedown tool?
Post by: zalfmon on March 08, 2008, 07:12:49 PM: I'd like 2 ;D
Title: Re: Who wants a brass RJ takedown tool?
Post by: Jack Foulard on March 08, 2008, 08:33:21 PM: Total up to 15.
Title: Re: Who wants a brass RJ takedown tool?
Post by: IDM on March 17, 2008, 09:27:33 PM: OKOK ;D
I get the picture!!
They are in the works!! ;D
I hope to hav some more mag extensions also soon.
Been busy with the secamp extensions. They are a bit moe difficult because of the secamps are a little rough around the edges so to speak. But it will get done.

for the takedown tools keep looking at the web site for updates.
IDMparts.com

Thanks
Bryce
Title: Re: Who wants a brass RJ takedown tool?
Post by: Jack Foulard on March 17, 2008, 10:02:58 PM: Bryce-

Could you post when these are available?

Thanks
Title: Re: Who wants a brass RJ takedown tool?
Post by: regalka on March 23, 2008, 08:05:14 PM: Yes, please let us know when (and how) they are available.

Ron
Title: Re: Who wants a brass RJ takedown tool?
Post by: IDM on March 26, 2008, 02:34:54 PM: Hi Guys
They are done!! :D
http://www.idmparts.com/product_info.php?products_id=39
Get them while they last!!

Bryce
Title: Re: Who wants a brass RJ takedown tool?
Post by: RickP on March 26, 2008, 04:26:58 PM: My order is in!

Rick
Title: Re: Who wants a brass RJ takedown tool?
Post by: dawkind on March 28, 2008, 03:44:33 PM: I can't get the complete download.......it times out before I can access anything or order. :-[
Title: Re: Who wants a brass RJ takedown tool?
Post by: Jimh on May 05, 2008, 10:58:04 PM: I will take one as well, don't know how they work, but I can figure that out after it arrives.
Jim
Title: Re: Who wants a brass RJ takedown tool?
Post by: Jack Foulard on May 05, 2008, 11:36:06 PM: Quote
I will take one as well, don't know how they work, but I can figure that out after it arrives.
Jim

Check IDMparts.com for the brass takedown tools and other stuff.
Title: Re: Who wants a brass RJ takedown tool?
Post by: STEPHEN_D on August 05, 2008, 10:24:54 PM: I checked today and it looks like these are out of stock. Are you going to produce any more brass takedown tools?

Thank you,
STEPHEN D
Title: Re: Who wants a brass RJ takedown tool?
Post by: RJ HEDLEY on August 09, 2008, 06:11:25 PM: 2'n 1 Tools are back in stock
Title: Re: Who wants a brass RJ takedown tool?
Post by: JHawk on August 09, 2008, 06:28:12 PM: Yes they are! Thanks RJ & Bryce. I ordered mine this afternoon from IDM.
Title: Re: Who wants a brass RJ takedown tool?
Post by: STEPHEN_D on August 09, 2008, 06:48:48 PM: I just ordered mine too. Thanks RJ!
Title: Re: Who wants a brass RJ takedown tool?
Post by: fultoncoshooter on August 10, 2008, 08:30:38 PM: how do these work?
Title: Re: Who wants a brass RJ takedown tool?
Post by: JHawk on August 11, 2008, 10:25:18 AM: Quote
how do these work?

Go to the Cleaning & Maintenance Section of this forum. You will see the first post on tools to use for making the takedown/assembly process easier. There is a picture of the brass takedown tool on the second page. This tool enables you to compress the recoil system ( guide rod/spring ) without using a pair of channel lock pliers or your fingers. Mine is on order but I can speak from experience with taking down full length guide rods on a 1911 that a tool like this can be a great asset. Good luck.
Title: Re: Who wants a brass RJ takedown tool?
Post by: Paindoctor on August 25, 2010, 09:08:14 PM: I'll take two !
Title: Re: Who wants a brass RJ takedown tool?
Post by: ccoorreeyy on August 25, 2010, 09:13:53 PM: Sorry Paindoctor, RJ is no longer with us. We miss him dearly though as he was a great great guy.

Yankee2500 is making them now but is sold out. He will have more for sale at some point.
Title: Re: Who wants a brass RJ takedown tool?
Post by: Brenden on August 26, 2010, 12:57:08 AM: Quote
Sorry Paindoctor, RJ is no longer with us. We miss him dearly though as he was a great great guy.

Yankee2500 is making them now but is sold out. He will have more for sale at some point.

Ain't that the truth-RJ was one of a kind!!