The Rohrbaugh Forum

Rohrbaugh Products and Accessories => Rohrbaugh R9 (all variations) => Topic started by: Ratzo on March 14, 2007, 07:32:53 PM

Title: Did what is was made for
Post by: Ratzo on March 14, 2007, 07:32:53 PM

Took a never Fired R9 to the range, fired 7 Rounds  as Fast as I could pull the trigger then put a 2nd mag in and again pulled the trigger as fast as I could, all was %100 percent, then fired up 28 rounds Not one problem, also had a Good target picture, went home cleaned her up and back in the Holster, now I know this weapon is ready for Defense.

Every month I will shoot several rounds just to keep the spiders out and will keep me up on the cleaning if it needs it or not. ;D

Title: Re: Did what is was made for
Post by: Newt on March 14, 2007, 10:38:21 PM

Sounds like a good plan! 8)

Title: Re: Did what is was made for
Post by: Richard S on March 15, 2007, 09:06:21 AM

Ratzo:

Thank you for the good report!

Title: Re: Did what is was made for
Post by: chameleon on March 15, 2007, 11:14:01 PM

Sounds good, what ammo did you happen to use?

Title: Re: Did what is was made for
Post by: Ratzo on March 16, 2007, 12:00:14 AM

I used the Recommended , (Gold dot 115 grain)  I told the Guy next to me that I was going to Fire this Firearm as fast as I could to see if it would Jam or have a FTF so not to disturb his shooting, he was impressed on a Firearm that small in 9mm and the way it fired, he did take down the info to check into the firearm.  Sometime you cannot Baby a firearm you just have to kick it in the A-- and show it who is Boss.

All Kidding aside my Life is to important to put a Non-recommanded round in it and assume when needed it is going to fire.

If people feel that they cannot do it with a 115 grain then it is best to go to a 45 cal.  Just my Opinion. :) :)

Title: Re: Did what is was made for
Post by: marvin on March 16, 2007, 05:07:19 AM

                                                                               Gee    I don't think that it gets any better than that.  

Jeff

Title: Re: Did what is was made for
Post by: Reinz on March 18, 2007, 02:44:33 AM

Great attitude and great range report!


Thanks


Reinz

Title: Re: Did what is was made for
Post by: theirishguard on March 18, 2007, 10:24:18 AM

Ratzo, way to go and the pup took it all and delivered. ;D  Tom

Title: Re: Did what is was made for
Post by: mshechte on March 19, 2007, 02:14:57 AM

Hello All, Brand new Member here! Just picked up a very gently used R9s from Lawyer here in Motown that bought the pup for his wife. She put one box (20 rounds) down the pipe and decided that the little pup had too much bark for her. Anyway I have been reading in some past posts about Slide cracking. Can anyone give me some more details on this? My pup is #631, and I am a bit concerned. Thanks

Title: Re: Did what is was made for
Post by: Richard S on March 19, 2007, 08:00:09 AM

mshechte:

Responded to your separate post.  Welcome again.