The Rohrbaugh Forum
Miscellaneous => Classifieds -- For Buying or Selling => Topic started by: yankee2500 on October 12, 2012, 08:12:23 PM
-
I'm sad to report that there are no more mag extensions available.
I have no immediate plans to have any more made.
NO I DON"T HAVE ANY. :(
OK heres the deal.
Anyone SERIOUSLY interested in a straight mag extension post how many you want and what color (Limited to BLACK, SILVER or UN-PLATED)
I will check and see what the cost will be for a of the straight extensions based on the amount of interest.
I can already tell you the cost will be more than the $47 price from before because I'm sure there isn't going to be demand for 200 + straight extensions.
I don't want to get anyones hopes up because if the number is too small it probably won't be worth doing.
Please try and keep the non relevant posts to a minimum so when I try and total this up it doesn't give me a headache. ;D 8)
Also this will probably end up being a PREPAY deal if it's going to happen, if that doesn't work for you don't post how many you want.
-
I will take 2 un-plated straight extensions. :)
-
Two (2) of any Flavor, but 'Un-plated" is my preference.
Thank you John!!!!!!!
-
John,
Two of any color will do, un-plated would be best.
I have my fingers and toes crossed!
Robar233
-
John,
Two of any color will do, un-plated would be best.
I have my fingers and toes crossed!
Robar233
That's going to make it pretty hard to work & walk. ;D
-
John-
Would like three total - one of each (black, silver and un-plated) if possible, but will take 3 of whatever becomes available. Thanks.
-Chris
-
I am interested in two unplated extensions
-
I would take a black and a silver
-
;D ;D ;D ;D ;D
-
Seems like more people were wanting the straight extensions but with interest in only 13 it probably wont happen. I'll give it a couple weeks and see if theres any more interest.
-
Can you have any of the hooked extensions redone to be straight?
I know they will be unplated but you will not have to make a significant investment?
-
Seems like more people were wanting the straight extensions but with interest in only 13 it probably wont happen. I'll give it a couple weeks and see if theres any more interest.
Adam,
It would probably be more work to try and reshape the hooked extensions than to make the straight ones from scratch. Plus I would loose what I pad to have them machined and anodized the first time and the potential sale of the hooked units.
But it was a good try. ;D
-
If you have any interest post it here, this will probably be the one and only chance to get a straight extension. :o
-
Up
-
8) 8)
-
I'll buy some curved ones if you can have them filed down similar to a straight extension.
-
Hi All: Haven't checked in awhile but here it goes: Really wanted some small straight extensions. I found a guy (about a month ago) and gave him some money and he's going to make 20 (10 for me). Haven't seen a prototype yet to check the slots and holes. Was going to make them in different lengths of straight and maybe a short, short hooked one, not full-sized hooked ones. Haven't worked out anodizing yet. I was just going to sand-blast or buff. I was thinking of making some artsy ones, light-weight ones, grippy ones or colored. But that's for much later. Was expecting a couple soon but he's doing this on the side at a tech club. I don't expect anything too soon or quick, he just got a job a day or so after I gave him money. Haven't heard lately. Haven't called; been busy with other random crap. If I'm lucky I might have several raw ones in 2-4 weeks, in a couple of lengths. He told me to wait on Forum /internet etc.I decided I should say something now. Can't promise ANYTHING. What does everyone think? What about aluminum black or anodized colors? Which alloy is best for anodizing? Already have a whole lot of 6061 stock. Thanks, Bob
Bob it's really in poor taste to hijack my thread to do this and I don't appreciate it.
John
-
Hi John,
I'm really sorry. I thought it would be rude to start another thread. Should this be undone? I thought this was the correct place. It seemed to me you were not going to do it, I had started this attempt to get the parts five weeks ago and thought I might help the group.
So sorry , Bob
-
I have deleted four posts prior to reading previous post( Which is now gone). While removing one word from "so sorry post" I noticed I could remove my own posts and did so. I also copied my "so sorry post in an e-mail to John.
-
Hi John,
I'm really sorry. I thought it would be rude to start another thread. Should this be undone? I thought this was the correct place. It seemed to me you were not going to do it, I had started this attempt to get the parts five weeks ago and thought I might help the group.
So sorry , Bob
Bob apology accepted.
John
-
I no longer need a pair of uncoated straight extensions, thanks though!
-
My Rohrbaugh should be coming within the week. I am considering one straight and one curved (both in black). Do you have any curved currently in stock?
Don
-
I'm sad to report that there are no more mag extensions available.
I have no immediate plans to have any more made.
-
I only just found this thread and hope I'm not too late. I would commit to two straight black extensions. Second choice would be two straight silver, if the black couldn't be available. I hope enough interest will be shown to make this possible.
Ed
-
John, I have carried the R9 for a while. Just now making it to this forum. If an order is placed, I will take 2 of the unplated or 2 of whichever style you are making. As an FYI, I also have a Seecamp and ordered mag extensions from Jeff, Owner, at Sigpower.com. He seems to also do the machining. I asked him if he would make some extensions for the R9 and he said that he would like to but does not have one to model. Jeff seemed very willing. You might want to check his site and call him at 1.423.293.0196. The reviews are excellent on his Seecamp mag extensions... BTW and if you decide to also make the curved extensions, I will also take some of them unplated if possible.
Raul
-
I need two straight unplated
-
I have Jeff's extensions for my Seecamps too and am very happy with them.
Ed
John, I have carried the R9 for a while. Just now making it to this forum. If an order is placed, I will take 2 of the unplated or 2 of whichever style you are making. As an FYI, I also have a Seecamp and ordered mag extensions from Jeff, Owner, at Sigpower.com. He seems to also do the machining. I asked him if he would make some extensions for the R9 and he said that he would like to but does not have one to model. Jeff seemed very willing. You might want to check his site and call him at 1.423.293.0196. The reviews are excellent on his Seecamp mag extensions... BTW and if you decide to also make the curved extensions, I will also take some of them unplated if possible.
Raul
-
Would like two black unplanted strait mag. Extensions
-
I'm sad to report that there are no more mag extensions available.
I have no immediate plans to have any more made.
-
Well, if you decide to make more, I'd like a couple...
-
Never mind, I'm good. Got lucky from a kind ex-pup owner, he parted with his.
Thanks
-
I know they aren't in production, but these extensions are the reason my big mitts can grab a pup. Thankfully I got them from another member as they were half the reason I purchased an R9. Sell the patent to Rohrbaugh?
-
There is no patent that I know about.