Author Topic: problem with round in chamber  (Read 393 times)

Offline PhilZ

  • Master
  • ****
  • Posts: 386
Re: problem with round in chamber
« Reply #30 on: May 09, 2019, 08:30:22 AM »
The screw size is 1/16".
http://www.acbsystems.com/boards/rohrbaugh/basefile/gripscrews.htm

The hex socket is 1/16".  Is that how the screw size is described?

Offline tracker

  • Grand Master
  • *****
  • Posts: 5132
Re: problem with round in chamber
« Reply #31 on: May 09, 2019, 09:37:11 AM »
Not exactly, as you suggest. I should have said that the correct Allen wrench size is 1/16".
« Last Edit: May 09, 2019, 12:01:19 PM by tracker »

Offline giansant

  • New Member
  • *
  • Posts: 10
  • New Member
Re: problem with round in chamber
« Reply #32 on: May 09, 2019, 08:01:02 PM »
Quote
Thanks - I don't see anything on their website - do I need to call them direct?

Yes call them, ask for Alex the Rohrbaugh guy. (there is another Alex, that does not deal with Rohrbaughs.)

They sell the grip screws for $5 a set, plus $15 for shipping.  They had both stainless and blued available last year when I ordered my replacements.

Good news is if you buy more stuff, you only get stuck with one shipping charge.

Thanks - talked to them today - ordered one of each set.

Offline giansant

  • New Member
  • *
  • Posts: 10
  • New Member

Offline tracker

  • Grand Master
  • *****
  • Posts: 5132
Re: problem with round in chamber
« Reply #34 on: May 09, 2019, 09:06:45 PM »
One other good thing to know is that if a screw is too tight to loosen because of loctite, don't fight it; just carefully put the heated tip of a small soldering iron on the screw for a few seconds and the screw should come out easily.